Venev Pegasus CBN “PREMIUM” Double-Sided Diamond Stone OSB (F1200/F2000Fepa-F) 100%
159,00€ (excl. tax)
Free delivery over 300€
Global Shipping Available
Shipping is back for US customers!
In stock
We decided to make stones for those who value their time the most and have a TSPROF K03 and other sharpening systems can be equipped with 200mm long stones. Its length of 200 millimeters and width of 35 millimeters allows it to cover a larger surface area in one stroke. This means you save your valuable time. But we didn’t stop there. We also gave you СBN grain. 2mm layer Even more resource and a steel core for perfect geometry. It seemed appropriate to us to combine the best with the best!
Double-Sided diamond block for shaping, sharpening and finishing the cutting edge.
The value in brackets represents the size in microns. See the Description for details.
Suitable for sharpening systems: TsProf K03 and other sharpening systems can be equipped with 200mm long stones.
Size: 200х35х12 mm (8″x 1 3/8″x 1/2″)
Grit: F1200/F2000 Fepa-F (3/2 – 1/0 micron)
Thickness of abrasive: 2 mm on each side
Abrasive concentration: 100%
Bunch: OSB
Diamond powder grade: CBN
Abrasive: “El’bor” – cubic boron nitride
Brand: Venev Industrial Diamonds
Model name (to be combined into one card): 200x35x12x2x2mm 100%.
Pairs well with
Product description
Our store is the official distributor of “Venev Industrial Diamonds“. Due to their high performance and durability, these abrasives have an excellent price value balance. Choosing the right grit ensures superb effortless result regardless of the task, be it repairing, resharpening or polishing.
Double-Sided diamond bar for sharpening the cutting edge. Suitable for TSPROF K03 and other sharpening systems can be equipped with 200mm long stones.
Modified OSB bundle. Double-Sided diamond bar for polishing the cutting edge. There is no boron carbide in the abrasive of the stone, which allows grinding by diamond powder alone. This eliminates the effect on grinding of boron carbide particles, which the factory purchases and cannot control, unlike diamond powder, which is factory produced and controlled. This eliminates scratches during grinding.
The abrasive layer is based on an aluminium base in the centre. The thickness of the working abrasive layer is 2 mm on each side, which ensures its durability.
All Venev diamond stones are factory marked in micron grit (according to GOST 9206). For example, “50/40” means that the stone contains only diamonds in the range between 50 to 40 microns, neither bigger, nor finer. If the marking reads “100/80-50/40”, it means that one side is 100/80, and the other is 50/40. The coarser the grain, the coarser the stone’s work.
For the convenience of our customers, our website also indicate the approximate correlation between the microns with the Fepa F standard grit. You can find it in the interactive table “here”.
FAQ:
What’s the convenience?
Buying one stone you have two different grit in one. The width of the bar is 35mm, which means that the working area is larger than normal bars. This speeds up the sharpening process.
What fluid to use?
These stones work well with many liquids:
- You can use a soapy water solution with Fairy. But, this kind of liquid evaporates faster than oil-based liquids. Which requires more frequent use.
2. Pure olive oil. Works well, evaporates more slowly.
3. Special oils for sharpening. Including oleic acid based oils.
What does it mean – Abrasive concentration: 100%?
The factory makes stones with 25%, 50% and 100% grain fill in the bond. This directly affects the cost of the stone. If speed and wear resistance are important to us in the initial stages (in such cases we recommend 100% concentration), then 25% may well be considered at the finish in order to save money.
What do the numbers on the stone 20/14, 14/10……..1/0 mean?
All Venev diamond stones are factory marked in micron grit (according to GOST 9206). For example, “50/40” means that the stone contains only diamonds in the range between 50 to 40 microns, neither bigger, nor finer. If the marking reads “100/80-50/40”, it means that one side is 100/80, and the other is 50/40. The coarser the grain, the coarser the stone’s work.
For the convenience of our customers, our website also indicate the approximate correlation between the microns with the Fepa F standard grit. You can find it in the interactive table “here”.
What systems are they suitable for?
Due to the special aluminium base – most systems. TSPROF (all models), Apex, Edge PRO, Kazak, Zhuk and others.
We ourselves do a lot of sharpening, so our team is ready to advise you if you have any matter.
Enjoy using your sharp knives!
Always here for you,
The 25,000miles team!
Additional information
| Weight | 246 g |
|---|---|
| Dimensions | 20 × 3,5 × 1,1 cm |
| Brand | |
| Series | Pegasus |
| Bonding | OSB |
| Abrasive grain type | CBN ("El'bor" – cubic boron nitride CBN) |
| Concentration of abrasive (%): | 100 |
| Grit (FEPA-F) | F1200 (3/2micron), F2000 (1/0micron) |
| Size (inch) | 8"x3¼"x3/8" |
| Size (mm) | 200x35x12 |
| Sharpening method | Free Hand, Sharpening Systems |
| Abrasive | Diamond |
Reviews
There are no reviews yet.